Front Panel - Fender Acoustasonic Ultralight Head T5A125V Owner's Manual

This highly portable, great sounding amp delivers toneful repro-
duction of acoustic-electric instruments...with unprecedented
features and power, available for the first time via Fender's pro-
prietary design. Now you can carry your tone with you to the
recording session or gig, quickly & easily; enjoy stereo effects
while practicing with headphones; plug in a mic/transducer
pickup system, or even a vocal mic when needed. Integrated
for use with the Acoustasonic Ultralight Stereo Enclosure.
Features include:
• 2 X 125 Watt Output Power switchable for stereo or mono
• Only weighs 7.6 lb (3.5 kg)!
• Instrument channel tailored for acoustic instruments
• Wide-range EQ
• Notch filter and Phase feedback controls
• String Dynamics™—tames harshness when you play hard
A. INSTRUMENT INPUT—
tric instrument in here. The instrument channel controls
are all in the top row.
B. MICROPHONE INPUT—
low-impedance microphone. The mic channel controls
are all in the bottom row. Phantom power supplied
(+15VDC ).
C. PHASE— Reverses the phase of the instrument
INPUT POWER
channel which will reduce feedback in some situations.
500W
�����
��
D. VOLUME— Adjusts the loudness of each channel.
E. TREBLE / MID / BASS— Adjusts the tone character of
each channel.
F. NOTCH— Rotate slowly to locate and supress
feedback that occurs at a particular frequency on the
FUSE
����� ���
instrument channel. Rotate fully counter-clockwise when ���� ����
not needed.
G. STRING DYNAMICS— A dynamic tone shaping filter that
��������� ���������
���� �������
varies with your playing intensity. Rotate clockwise to
reduce treble-frequency harshness at peak levels (or high
volume settings) without affecting the crisp brightness
when playing more gently.
H. EFFECTS LEVEL— Adjusts the amount of the effects in
each channel. To turn OFF effects: rotate fully counter-
clockwise or use the footswitch.
6
Acoustasonic™ Ultralight Amplifier

Front Panel

Plug your acoustic-elec-
Balanced XLR jack for a
4 CONDUCTOR = STEREO R /L
2 CONDUCTOR = RIGHT 2 CONDUCTOR = LEFT
����� ����
������
����
2 CONDUCTOR = MONO 2 CONDUCTOR = MONO
◊
• Microphone channel designed for vocals
• True electronically balanced XLR input
• Phantom Power supplied for Condenser mics
• 16 hand-crafted DSP effects selections for each channel
• Professional Line Out—Level control and Ground Lift
• Switchcraft HPC® speaker output—Speakon® compatible,
superior power transfer and locking connectors
• Voltage Selector—plug-in worldwide (approved power
cord required)
• Premium solid Maple wood top & side panels
• Invisible cabinet docking system (patent pending)—
magnetically secures your amplifier on top of an Acoustasonic™
Ultralight Enclosure
• Stereo Headphones output
• 2-button Footswitch and padded Gig bag included
��
I. EFFECTS SELECT— Selects the active effect for each
channel. See Effects Descriptions on page 8.
J. TUNER/MUTE— Press IN to disable all audio output
from the amplifier; useful for silent tune-ups.
flashes when selected.
K. PHONES— Plug your stereo headphones in here; speaker
outputs are automatically disabled.
���� ��������
L. POWER INDICATOR—
������ �����
������
����
Flashes if the unit detects an overload condition
such as a faulty speaker cable, improper connection, ����
���
overheating, or incorrect speaker impedance. The ampli-
��� ���
fier may be more susceptible to overload if high-output
effects or other devices are used. The unit will automati-
cally try to reset, but if an overload condition still exists
after 5 attempts, the unit will remain in protection mode
until powered OFF. Remove the overload condition then
switch the power back ON; if this LED still flashes, take the
unit to an authorized Fender® service center.
If the Power Indicator does not illuminate, check the
fuse. If the fuse is good, leave the unit unplugged for 15
minutes to allow the power supply to reset. If that fails,
take the unit to an authorized Fender® service center.
◊
LED
Illuminates when the unit is on.
���������� ���������