CDS_7000_ DEC_en
21.05.2007
PROG
ENERGY
f
PROG
2 88.90
f
PROG
FANTASY
f
PROG
3 89.55
22
14:49 Uhr
TUNER MODE
Selecting the Tuner input source
Press »FUNCTION« to select the input source.
1
!
– The most recently selected station is activated (Last Station
Memory).
– Display: e.g. »FM 100.60« or »ENERGY«.
Selecting a preset position
Press »BAND« to select the frequency band (FM or MW).
1
!
MHz
Select the preset position in steps by pressing »
2
– Display: »PROG« and, for example, »2« and the frequency or
the station name.
Stereo/mono reception
When the hi-fi system receives FM stereo stations, »
the display. If the signal from the FM stereo station is weak, you can
improve the sound quality by switching to mono reception.
1
Press
»FM
reception.
– Display: »
!
2
To switch back to FM stereo, press
control.
– Display: »
Note:
If the hi-fi is set to stereo reception and is receiving a mono
signal, the »
Automatic station search
By starting the automatic station search, you can delete all the
existing preset stations and replace them with new stations at the
same time.
Start the automatic search in tuner mode by pressing and
1
MHz
holding down
– After the search has finished, you will hear the station stored
at preset position 1.
Note:
The automatic station search can be interrupted by briefly
pressing »
Seite 22
______________________________________
MODE« on the remote control to switch to mono
« disappears.
»FM
«.
« display flashes.
»P/RANDOM/
«.
«.
7
« or »
«.
5
6
« appears in
MODE« on the remote