Selecting Sound Effects; Setting The Equaliser; Switching The Ultra Bass System On And Off; Switching The Display - Grundig CDS 7000 DEC Manual

CDS_7000_ DEC_en 21.05.2007
CLASSIC
f
BASS 0
f
TRE 0
f
TUE 19 : 45
14:49 Uhr
GENERAL FUNCTIONS

Selecting sound effects

You can select from the sound settings USER, CLASSIC, POP, JAZZ
!
and ROCK. The basic setting is USER.
Select the sound setting by pressing »DSC«.
1
– Display: »USER«, »CLASSIC«, »POP«, »JAZZ« or »ROCK«.

Setting the equaliser

The USER sound setting allows you to make your own personal
equaliser settings.
1 When the device is on, press »DSC« repeatedly until »USER«
!
appears in the display.
2 Press »DSC« again for approximately 2 seconds.
– Display: »BASS 0«.
3 Press »DSC« to choose the setting (BASS or TREBLE).
!
– Display: »BASS 0« or »TRE 0«.
Note:
If you do not press any button within five seconds, the hi-fi
system will automatically quit this mode.
Set the values by pressing
4
minimum »-6«).
– The equaliser display disappears after 5 seconds.

Switching the Ultra Bass System on and off

Press »UBS« to switch the Ultra Bass System on and off.
1
– Display: briefly »UBS ON«, or »UBS OFF«.

Switching the display

In Tuner and CD mode you can switch the display to show the time
and day.
1 Press »DISPLAY« repeatedly on the remote control until time
and day appear in the display.
Seite 21
»– VOLUME +
_______________________
« (maximum »+6«,
21