Goldmund SRP2.3 User Manual
  1. Manuals
  2. Brands
  3. Goldmund Manuals
  4. Amplifier
  5. SRP2.3
  6. User manual
Goldmund SRP2.3 User Manual

Goldmund SRP2.3 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GOLDMUND SRP2.3
PREAMPLIFIER
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRP2.3 and is the answer not in the manual?

Questions and answers

Related Manuals for Goldmund SRP2.3

Summary of Contents for Goldmund SRP2.3

  • Page 1 GOLDMUND SRP2.3 PREAMPLIFIER...

  • Page 2: User Manual

    GOLDMUND SRP2.3 PREAMPLIFIER USER MANUAL ATTENTION : No connection or manipulation must be done before reading these instructions. Damage to the preamplifier may result if the following instructions are not consciously understood and applied.

  • Page 3: Line Voltage

    2 - CHOICE OF PREAMPLIFIER LOCATION The GOLDMUND SRP2.3 preamplifier generates a small amount of heat. It is necessary to allow a proper cooling of the circuits. Avoid any location which is not properly ventilated and avoid to put on top any equipment sensitive to temperature.
  • Page 4 5 - CONTROLS AND UTILIZATION - POWER ON The GOLDMUND SRP2.3 preamplifier has no power switch. It is powered ON as soon as the power cord is connected to the wall plug. It must remain connected all the time. When powered on first, the preamp will become operative immediately. Do not power ON the power amplifier immediately to insure proper stabilization of all the circuitry and avoid any unwanted noises.

  • Page 5: Sound Quality Optimization

    GOLDMUND representative readjust the DC offset. This very simple operation takes only two minutes and will give you the safety of long years of unmatched sound quality.

  • Page 6: Technical Data

    TECHNICAL DATA OUTPUT LEVEL - Nominal level : 0.63 V RMS. - Maximum output level : 3 V RMS. - Output stage output impedance : < 10 Ohms. - Corrected output impedance # 330 Ohms. FREQUENCY RESPONSE These values for any level to 17 V RMS. - +/- 0.1 dB, 10 Hz - 100 kHz.
  • Page 7 FRONT PANEL CONTROLS - VOLUME control. - SELECTOR switch. REAR PANEL CONNECTORS AND CONTROLS - AC line connector 3 lugs. - Output and input connectors RCA (right and left), 3 Digital optional inputs RCA. SIZE AND WEIGHT - 44 cm W x 30 cm D x 6 cm H. - Weight : 4 kG.

Table of Contents