Goldmund MIMESIS SRM2.3 User Manual
  1. Manuals
  2. Brands
  3. Goldmund Manuals
  4. Amplifier
  5. MIMESIS SRM2.3
  6. User manual
Goldmund MIMESIS SRM2.3 User Manual

Goldmund MIMESIS SRM2.3 User Manual

Mono
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GOLDMUND MIMESIS SRM2.3
MONO AMPLIFIER
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIMESIS SRM2.3 and is the answer not in the manual?

Questions and answers

Related Manuals for Goldmund MIMESIS SRM2.3

Summary of Contents for Goldmund MIMESIS SRM2.3

  • Page 1 GOLDMUND MIMESIS SRM2.3 MONO AMPLIFIER...

  • Page 2: User Manual

    GOLDMUND MIMESIS SRM2.3 MONO AMPLIFIER USER MANUAL ATTENTION : No connection or manipulation must be done before reading those instructions. Damage to the amplifier may result if the following instructions are not consciously understood and applied.

  • Page 3: Choice Of Amplifier Location And Cooling

    2 - CHOICE OF AMPLIFIER LOCATION AND COOLING The GOLDMUND MIMESIS SRM2.3 amplifiers, as all the high quality amplifiers may generate a large amount of heat if driven into high power. It is mandatory to allow a proper cooling of the heat sinks. Avoid any location which is not properly ventilated and avoid putting other equipment on top of them.
  • Page 4 5 - AMPLIFIERS CONTROLS On the front plate of the GOLDMUND MIMESIS SRM2.3 amplifier you will find only one switch : The POWER key, used to power the amp on. When turned ON the channel is immediately connected and the POWER led lights up.

  • Page 5: Sound Quality Optimization

    - Speaker polarity. Even if you have an absolute phase inverter on your preamplifier (as on the GOLDMUND MIMESIS 2+, MIMESIS 22M, MIMESIS 7.5), and even if you have carefully selected the proper line phase (see in next paragraph), there is a possibility to again increase the sonic quality of your speakers by reverting the polarity of both speaker cables at amp termination.

  • Page 6: Safety And Precautions

    GOLDMUND representative readjust the DC offset. This very simple operation takes only two minutes and will give you the safety of long years of unmatched sound quality.

  • Page 7: Technical Data

    TECHNICAL DATA POWER - Nominal power : 200 W RMS (2 - 8 Ohms). 100 W RMS (1 - 16 Ohms). - Maximum power : > 300 W RMS (3 Ohms). - Maximum voltage : 45 V peak. - Maximum current : > 25 A peak. FREQUENCY RESPONSE These figures are valid for any level between 0 and nominal power.

Table of Contents