Line Voltage; Connections - Goldmund METIS 3 User Manual

3

LINE VOLTAGE

The Goldmund Metis 3 amplifier is preset at the factory for your country's voltage. It
functions with AC voltages between either, 200V and 245V, or, 95V and 125V.
If your AC line is usually out of these tolerances, please consult your local Goldmund
dealer.
Please check the value of the mains line fuse. This fuse is located in the power cord
receptacle. The lid can be removed with a small screwdriver when the cord is removed.
Use a 4A slow-blow fuse.
4

CONNECTIONS

Check if volume control is down to zero on the preamplifier.
Connect the analog outputs of your analog preamplifier to the analog inputs of the
Goldmund Metis 3.
Connect the speaker cables to the red and black terminals accessible at the back of the
amplifier.
You may notice that the ground of the input and the black speaker terminal are of the
same polarity. The amplifier is non-inverting in phase.
Then, connect the power cords to the back of the amplifier and plug it in the nearest wall
plug. Use a 3 lugs grounded plug, for safety reasons. To get the best sound of the
amplifier, avoid multiple plugs or extension cords.
GOLDMUND METIS 3 – ANALOG POWER AMPLIFIER - 6