Troubleshooting - Goldair GMC300 Operating Instructions Manual

6 in 1 multi cooker
Table of Contents

Advertisement

Operating your Multi Cooker, continued
FLASH FRY:
Place oil into the inner pan up to the fill mark
(2.54cm). Make sure not to fill above this mark.
Set the control knob to FLASH FRY position;
the indicator light will turn on, then off when
correct temperature is reached.
Place your ingredients in the frying basket
(optional) and drop it in the oil. Do not fill the
basket beyond the fill mark.
Drain the food on kitchen paper.
Always set your Multi Cooker to OFF position
and disconnect from mains power supply after
cooking.
Check the recipes section for ideas to get you
started.

TROUBLESHOOTING

The indicator light does not light up.
Check whether the inner pan is properly
inserted.
Make sure the plug is properly plugged into
the wall outlet.
The temperature is too low or too high.
Set the control knob correctly. Turn the
button clockwise towards FLASH FRY for
more heat and counter-clockwise towards
WARM for less heat.
CLEANING AND MAINTENANCE:
Do not submerge the base unit in water or
other liquids; do not place it in the
dishwasher.
Let the multi cooker cool down completely
before cleaning.
Cleaning:
Make sure that the power plug is disconnected
at the wall outlet.
Remove the lid and any other accessories.
Wash the accessories in warm sudsy water.
Remove hot oil from the inner pan before
cleaning.
Remove the inner pan from the device and
remove remaining food and liquids, and let the
pan cool down. Fill the inner pan with warm
water and some detergent.
Do not use abrasive cleaning products for the
inner pan.
Wipe the surface of the base unit with a damp
sponge.
Never use scouring pads or other abrasive
products for cleaning.
Maintenance:
Ensure that the inner pan is completely dry
before use.
Never pour cold water into the inner pan, when
the pan is hot.
Do not use any steel wool or other abrasive
agents for cleaning; this can damage the non-
stick coating.
Do not use metal utensils.
Never submerge the base unit in water or other
liquids. Wipe clean with a damp cloth.
Never add water to hot oil.
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday – Friday 8am-5pm
Website: www.goldair.co.nz
Phone: 0800 232 633

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fmc320

Table of Contents