Qlogic SANbox 3810 Interface Manual page 272

Command Reference
Set Setup Callhome
FromEmailAddress
ReplyToEmailAddress
ThrottleDupsEnabled
Notes
The Callhome service must be active to support Call Home e-mail
notification. Refer to the
The primary, secondary, or both SMTP servers must be properly addressed
and enabled on the switch to activate Call Home e-mail notification. If both
SMTP servers are enabled, the primary server is active.
The switch will reroute Call Home e-mail messages to the secondary SMTP
server if the primary should become unavailable. Primary and secondary
identities do not change upon transfer of control.
Callhome profiles determine the events, conditions, and e-mail recipients of
Call Home e-mail messages. Refer to the
for information about creating Call Home profiles.
13-104
Table 13-25. Call Home Service Configuration Settings
Entry
"Set Setup Services" command on page
Description
E-mail address that is defined as the sending
address in the From: field of the e-mail message.
The format is account@domain. This field is
required. Undeliverable messages are returned to
this address unless overridden by the
ReplayToEmailAddress parameter.
E-mail address that is to receive replies to the out-
bound e-mail message. The format is
account@domain. This parameter overrides the
FromEmailAddress parameter.
Enables (True) or disables (False) the throttling of
duplicate e-mail messages in the message queue.
When enabled, duplicate e-mail messages that
enter the queue within 15 seconds of the original
are suppressed. The original message is sent with
a report of the number of suppressed duplicates.
"Profile" command on page 13-56
S
13-110.
59270-00 A