Ipsec - Qlogic SANbox 3810 Interface Manual

A

Ipsec

Manages the IP Security database. The IP Security database consists of the
Security Association database and the Security Policy database. The Ipsec Edit
command opens a session in which to create and manage associations and
policies.
Authority
Admin session except for the History keyword. The Clear keyword also requires
an Ipsec Edit session.
Syntax
ipsec
cancel
clear
edit
history
limits
save
Keywords
cancel
Closes the current Ipsec Edit session. Any unsaved changes are lost.
clear
Deletes all associations and policies from the from the volatile edit copy of the IP
security configuration. This keyword requires an Ipsec Edit session. This keyword
does not affect the non-volatile IP security configuration. However, if you enter the
Ipsec Clear command followed by the Ipsec Save command, the non-volatile IP
security configuration will be deleted from the switch.
NOTE:
The preferred method for deleting the IP security configuration from the
switch is the
edit
Open an Ipsec Edit session in which to create and manage associations and
policies. Ipsec Edit session commands include Ipsec Clear, Ipsec Association
commands, and Ipsec Policy commands. This keyword requires an Admin
session.
59270-00 A
Reset Ipsec command.
Command Reference
Ipsec
13-39