Verifying That The Driver Is Loaded - Qlogic Fibre Channel Adapter User Manual

A

Verifying That the Driver is Loaded

Follow this procedure to ensure that the QLogic FC adapter driver is loaded on the
ESX system
To verify that the QLogic FC adapter driver is loaded:
1. Log in to the service console as root user.
2. Execute the following command:
# esxcfg-module -l | grep qla2300
Depending on the ESX Server version, the listed module will be one of the
following:
Figure 3-3
that the QLogic driver shows as Enabled Loaded.
FC0054606-00 A
qla2300_707 on ESX 3.0.x
qla2300_707_vmw on ESX 3.5 and later
shows an example of the output. For proper operation, ensure
Figure 3-3 Verifying That the Driver is Loaded
Configuration

Verifying That the Driver is Loaded

3-5