Finding Adapters On Vmware Esx - Qlogic Fibre Channel Adapter User Manual

A
2. To list the QLogic storage adapters present on the system, run the following
command:
ls /proc/scsi/qla2300
An example output may be:
# ls /proc/scsi/qla2300/
1
3. To view additional details, run the following command:
cat /proc/scsi/qla2300/<adapter_number>
Where <adapter_number> is one of the adapter numbers shown in
Step
This command lists the firmware revision, driver revision, and the boot code
version, as shown in
FC0054606-00 A
2 3 4 5 6 HbaApiNode
2.
Figure
Figure 3-2 Finding Adapters on VMware ESX
Identifying QLogic FC Adapters on VMware ESX
3-2.
Configuration
3-3