Qlogic Fibre Channel Adapter User Manual page 7

A
Text in ALL CAPITALS indicates the name of a key that you press on the
keyboard. For example:
Text in italics indicates emphasis, terms, or document titles. For example:
Italicized text within angle brackets indicates user-defined variables. For
example:
Text within square brackets indicates optional parameters. For example
Text in
section in this guide, and links to Web sites are shown in
For example:
Screen captures that depict only the essential portion of the user interface
currently under discussion (rather than the entire dialog box or window) are
shown with jagged edges, as shown in
Figure i Jagged-edged Screen Shots Depict Partial Interface
FC0054606-00 A
On the QLogic BIOS banner screen, press CTRL+Q.
Refer to the VMware IO Compatibility Guide.
cat /proc/scsi/qla2300/<adapter_number>
iscli [optional parameters] [Command Variable]
blue font indicates a hyperlink (jump) to a figure, table, chapter, or
Table 4-1 lists the configurable driver parameters.
See "Configuring Boot from SAN" on page
For more information, visit www.qlogic.com.
underlined
4-10.
Figure i.
blue.
Page vii