Table of Contents
Advertisement
REMOTE CONTROL MODEL MBR3420
VCR OPERATIONS
The following functions and operations
apply to
Zenith
VCR models built after 1988. The remote control supplied
with your VCR may have keys not duplicated
on the new
remote. If these functions are desired, the original remote
control will have to be used.
For complete details on how to operate your Z_:nith VCR,
refer to the operating guide supplied with it.
The remote control must be !in the VCR mode to operate
your VCR.
MODE
Press repeatedly to select the
VCR mode of operation.
VCR
Lights when VCR mode of operation
is selected.
MENU, SELECT, ADJUST and QUIT
Used with the on-screen menus and
programming options of the VCR. See
VCR operating guide for details
Numbered Buttons
Used to select a TV channel through
the VCR. Also, used to set the timer in
the VCR, and to enter programming
information.
ENTER
Used with the numbered buttons to
select a TV channel through the VCR.
AM/PM
Used to set timer during programming.
MEMORY
Used to activate the VCR MEMORY
feature. See VCR operating guide for
details.
!
For optimum
performance,
point the
remote
control
toward your VCIL
/
RECORD, STOP, PAUSE, SEARCH,
"
REW, PLAY and F FWD
Used for tape recording and playback
functions. See the VCR operating guide
for details.
Y
Remote Control MBR3420
VCR Operations
OFF/ON
Used to turn VCR ON or OFF.
FLASHBK (Flashback)
Press dlaring VCR playback to view the
chamael tuned by the VCR.
CHANNEL Up/Down
t
sed to select a TV da_mnelbygoing
-- Up or Down through claannkels from the
VCR.
TIMER
Activates TIME RECORD
on
some VCRs.
TV/VCR
Used to select the souxce of the
programs seen on the TV. Switches the
VCR between TV mode and VCR
mode. ']iV Mode: channels are selected
throu_t the TV. VCR Mode: channels
or tape operation
are selected through
the VCR.
2599-A
5 -- 3
Advertisement
Table of Contents
