Vcr Operations - Zenith SM2784BT Operating Manual & Warranty

REMOTE CONTROL MODEL MBR3430
VCR OPERATIONS
The following functions and operations apply to Zenith VCR
models built after 1988. The remote control must be in the
VCR mode to operate your VCR.
The remote control supplied with your VCR may have keys
not duplicated on the new remote. If these functions are de-
sired, the original remote control will have to be used.
MODE
Used to select the VCR mode of
operation.
VCR
Lights when VCR mode of
operation is selected.
MENU, SELECT, ADJUST
and QUIT
Used with on-screen menus and pro-
gramming options of the VCR. See
VCR operating guide for details.
Nu mbered Buttons
Used to select a TV channel through
the VCR. Also, used to set the
t_ter in the VCR, and to enter pro-
gramming information.
ENTER
Used with the numbered buttons to se- /
lect a TV channel through the VCR.
AM/PM
Used to set timer during program-
ming.
t
Point toward your VCR.
ADJ _ ADJ
®®®
0@@
CHANNEL
VOLUME
LEARN PIP
SWAP TIMER SEO
RECORD STOP PAUSE SEARCH
I 3> CED r,.--,,
REW PLAY F FWD TVNCR
OFF/ON
Used to turn VCR ON or OFF.
FLASHBK (Flashback)
Used during VCR playback to
view the channel tuned by the
VCR.
h CHANNEL Up/Down
Used to sequence through channels
on the VCIL
TIMER
Activates TIME RECORD on
some VCRs. See the VCR operat-
ing guide for details.
TV/VCR
Used to select the source of the pro-
grams seen on the TV. Switches
the VCR between TV mode and
VCR mode.
TV Mode: Channels are selected
through the TV.
VCR Mode: Channels or tape op-
eration are selected through the
VCR.
RECORD, STOP, PAUSE,
SEARCH, REW, PLAY and
F FWD
Used for tape recording and play-
back functions. See the VCR operat-
ing guide for details.
27_-o 4 _ 3