Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs.
Before Using TUNING BAND
Connect and turn ON all external equipment,
such as cable-
TV decoder, VCR, etc. Use AUTO CH. SEARCH
if not
previously used.
To Use TUNING BAND
1. TUNING
BAND should be selected
if you followed
the "Basic
Menu
Operation"
given
in the
"On-
Screen
Menus"
section.
SETUP MENU
AUTO CH. SEAI_CH
CH. ADD/DEL
CH. LABELS
• -_ TUNING BAND
AUTO RNE TUNE
CLOCK
SET
CAPTIONS
CH. BACKC-I_OU ND
BROADCAST
Selecting
Tuning Band
2. Press
ADJUST
(ADJ)
Left/Right
to select
the
desired
tuning band, as follows:
•
BROADCAST
[s used for standard
"over-the-air"
broadcasts.
•
Cable - CATV is used for most standard
cable-TV
(CATV) systems.
•
Cable - HRC is used for cable-TV systems that use
HRC (Harmonically
Related Carrier).
•
Cable - ICC is used for cable-TV systems using ICC
(Incremental
Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast and cable
tuning bands are shown below:
BROADCAST Baud
VHF 2 to 13
UHF
14 to 69'
*
Channels above 69 are not selectable.
CATV, HRC and ICC Bands
1 to 125"*
** Channels above 125 may not be selectable.
When Some Channels Are Not Clear
If some channels are not clear, change the AUTO FINE
TUNE. You may have to tJ3' different TLINING BAND and
AUTO
FINE TUNE settings until you get a clear picture,
channel-to-channel.
Refer to the AUTO
FINE TUNE op-
tion for details.
AUTO FINE TUNE
Purpose
Lets your TV compensate
for variations in broadcast
and
cable-TV frequencies.
If you are having difficulty tuning channels, the AUTO
FINE TUNE may have to be set manually to match your
viewing needs.
Before Using AUTO FINE TUNE
ConnecX and turn ON all external equipment, such as cable-
TV decoder, VCR, etc.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
-_ AUTO RNE TUNE
CLOCK
SET
CAPTIONS
CH. BACKGROUND
RXED
To Use AUTO FINE TUNE
1. AUTO
FINE TUNE', should
be selected
if you fol-
lowed
the "Basic
Menu
Operation"
given
in the
"On-Screen
Menus" section.
2. Press
ADJUST
(ADJ)
Left/Right
to select
the
desired mode of operation,
as follows:
•
FIXED is used to :receive "over-the-air"
TV stations,
and with many cable TV systems.
•
SEARCH
is used only when the TV must search to
find the frequency being received, such as when used
with certain VCRs and video game oantrollers.
When Some Channels
Art Not Clear
If some channels are not clear, change the TUNING
BAND. You may have to try different AUTO FINE TUNE
and TUNING
BAND settings until you get a consistently
clear picture, channel-to-chalmel.
Refer to the TUNING
BAND option tor detai_s.
Selecting Auto Fine Tune
_9_o
7 -- 3
Advertisement
Table of Contents
