Related Manuals for Zenith Sentry 2 SLS1935W
Summary of Contents for Zenith Sentry 2 SLS1935W
- Page 1 OPERATING GUIOE _ WARRANTY SmNTFIY Monaural Color TV with Remote Control and Closed Captions Return the Product Registration Card, and your TV could be free! recycled paper...
- Page 2 Do not defeat the safety purpose of the polarized plug. Copyright © Zenith Electronics Corporation 1993 XVWA_I...
- Page 3 " CONNECTIONS FOR YOUR TV_ CONNECTION CENTER ON BACK OF TV Your TV has one of the two connection centers shown 2. AUD (Audio) Audio input from VCR or other video equipment below. Refer to the corresponding detail while reading the (Disc Player).
- Page 4 CONNECTIONS FOR YOUR TV STEP 1, MAKE BASIC CONNECTION TO TV Your connection is made to the VHF-UHF/CABLE jack or There are four basic hook ups to your TV; outdoor antenna to the "IV ANT jack on the back of the TV. This jack ac- (or master antenna) with or without VCR, and cable-TV cepts 75-ohm cable terminated in an F-type male connec-...
- Page 5 CONNECTIONS FOR YOUR TV STEP 1. MAKE BASIC CONNECTION TO "iV (CONTINUED) Cable-TV Connection to TV CH 3/4 OUTPUT If You Have a Converter/Decoder Box: Connect 75-ohm output from con- verter/decoder box into the VHF-UHF/CABLE jack or to the TV ANT jack on the TV. CONVERTER I CABLE-TV If You Do Not Have a Converter/Decoder...
- Page 6 CONNECTIONS FOR YOUR TV STEP 2. MAKE VCR CONNECTIONS TO TV (SELECT MODELS) MONAURALVCR MONAURAL VCR 3UTPUTS Connections: 1. Connect VCR AUDIO OUT to the AUD IN (Audio Input) jack on TV. AUDIO 2. Connect VCR VIDEO OUTPUT into the VID IN (Video Input) jack on TV.
- Page 7 THE FIRST TIME YOU OPERATE YOUR TV STEP 1. CONNECT THE POWER Plug your TV into an unswitched AC power source. The switched AC outlets found on some video equipment will not continue supplying power to the TV once the equip- ment is turned off.
- Page 8 OPERATING YOUR TV BASIC TV OPERATIONS Selecting Channels by Using CHANNEL (CH) Up/Down (All Models): You may select a channel through channel scan- 10".56 10:56 ning by using CHANNEL (CH) Up/Down. Only channels MUTED stored in the channel scan sequence can be selected. Selecting Channels by Using Numbers on Remote (Select Models): Press the numbers corresponding to the channel desired, then press ENTER (ENT).
- Page 9 GETTING TO KNOW YOUR TV HORIZONTAL CONTROL PANELS The following description applies to models having a horizontal control panel. rot. IOoor & " ,-I D Full Size Control Panel Mini Control Panel Front Panel Controls 5. VOLUME (VOL) Up/Down Press to increase or decrease the sound level.
- Page 10 GETTINGTO KNOW YOUR TV " VERTICAL CONTROL PANEL The following description applies to models having a verti- cal control panel. OR:ION CHANNEL _OLUME MENU SELECT ADJUST ENTER Mini Control Panel Full Size Control Panel 5. MENU Front Panel Controls Press once again to see a menu.
- Page 11 REMOTE CONTROL MODEL SC2300 TV OPERATIONS For optimum performance, point the remote control toward your Zenith TV. OFF-ON Used to turn TV ON or OFF. VOLUMEgtt,l_l_l. VOLUME Up/Down CHANNEL Up/Down Used to adjust the volume level of the TV. Used to select a TV channel by going up or down through channels.
- Page 12 For optimum performance, point the remote control toward your Zenith TV. OFF-ON Used to turn TV ON or OFF. FLSHBK (Flashback) Used to return to the last TV channel you were watching.
- Page 13 Battery leakage can cause damage inside the compartment. to the remote control. 3. Replace the cover by inserting the tab on the bottom • Zenith is not responsible for damage caused by such of the cover into its housing. Snap the cover into battery leakage.
- Page 14 TV OPERATIONS The remote control must be in the TV mode to operate The following functions and operations apply to Zenith "IV your TV. Press MODE to select the TV mode. The TV in- models built after 1981. dicator fights when you are in the TV mode.
- Page 15 VCR. Press MODE to select the VCR mode. The VCR indicator lights when you are in the VCR mode. For complete details on how to operate your Zenith VCR, refer to the operating guide supplied with it. For optimum performance, point the remote control toward your VCR.
- Page 16 Battery leakage can cause damage to the remote control. inside the compartment. 3. Replace the cover by inserting the tab on the bottom • Zenith is not responsible for damage caused by such of the cover into its housing. Snap the cover into battery leakage.
-
Page 17: Table Of Contents
ON-SCREEN MENUS AVAILABLE MENUS There are two menus: SETUP and VIDEO. These menus Your "IV is menu operated, that is, adjustments that can be -list everything you can adjust to your personal preference or made to the TV appear on the screen in a list of choices you can make by using the controls on the front panel of the TV needs. - Page 18 ON-SCREEN MENUS BASIC MENU OPERATIONS 3. To Access an Option/Feature for Adjustment Left/Right Press ADJUST (ADJ) access selected option/feature to see its submenu or status display. Follow the instructions shown in the dis- play. In most cases, you simply press ADJUST (ADJ) Left/Right...
-
Page 19: Setup Menu
• SETUP MENU (_-> AUtO CH. SEARCH CH. ADD/DEL TUNING BAND AUTO FINE TUNE CLOCK SET . CAPTIONS TUNING BAND ADDED BROADCAST PRESS ADJUST PRESS ADJUST PRESS ADJUST AUTO CH. SEARCH 1 KEY TO START KEY TO CHANGE KEY TO CHANGE Auto Ch. -
Page 20: Ch. Add/Del
SETUP MENU 2. Using CHANNEL (CH) Up/Down go to the nearest CH. (Channel) ADD/DEL channel ABOVE the channel you wish to add. Purpose NOTE: channel will not appear while using Lets you add channels to and remove channels from the ac- CH. - Page 21 SETUP MENU AUTO FINE TUNE To Use AUTO FINE TUNE Purpose 1. AUTO FINE TUNE display should be shown on the Lets your TV compensate for variations in broadcast and TV if you followed the "Basic Menu Operation" cable-TV frequencies. given in the "On-Screen Menus"...
-
Page 22: Captions
€, SETUP MENU CAPTIONS Application Purpose Your new TV is able to decode and display the closed cap- Displays closed captions (CC) or informational text when tions and informational text that are broadcast with some available on the selected channel. TV shows. -
Page 23: Video Menu
VIDEO MENU NOTE: All adjustments on the VIDEO Menu are optional. You do not have to BRIGHTNESS COLOR use these features in order to use your TV. TINT - > CONTRAST SHARPNESS PICI'URE PREF CONTRAST ÷ PR_ADJUST r PRESSADJUST PRESS ADJUST COLOR BRIGHTNESS KEY TO CHANGE... - Page 24 MAINTENANCE AND TROUBLESHOOTING CARING FOR YOUR TV Cabinet Care Your TV will look better, have a longer life and perform better if you care for it properly. Non-Wood Cabinet or Cabinet Components. Moisten a soft cloth with a mild soap solution or Ivory dish- safety, unplug the "IV from the power outlet.
- Page 25 TV. Simply disconnect it from AC power by un- Safety performance. Keep your Zenith ALL Zenith. plugging the AC power cord from the power outlet. Wait a few minutes, then plug the TV back into the power outlet.
- Page 26 Service Labor - During a period of 90 days from effective screen size must be taken to a distributor-approved Zenith warranty date, Zenith will pay for service labor by a U.S. or service center for warranty service and must be picked up...
- Page 27 Part No. 206-2573 ZENITH ELECTRONICS CORPORATION Printed in U.S.A. 1000 MILWAUKEE AVENUE EP-EDC GLENVIEW, ILLINOIS 60025...