Remote Control Model Sc3820; Vcr Operations - Zenith SENTRY 2 SLS1931S Operating Manual & Warranty

Sentry 2 series monaural color tv with remote control and closed captions
Table of Contents

Advertisement

REMOTE
CONTROL
MODEL SC3820
VCR OPERATIONS
The following functions and operations apply to Zenith
VCR models built after 1991.
For complete details on how to operate your Zenith VCR,
refer to the operating guide supplied with it.
The remote control must be in the VCR raode to operate
your VCR. Press MODEl to select the VCR mode. The
VCR indicator lights when you are in the VCR mode.
For optimum performance, point the
remote control toward your VCIL
VCR Mode Indicator Light
Lights when remote is in VCR mode of
operation.
MENU, SELECT, ADJUST and QUIT
Used with the on-screen menus and
programming
options of the VCR.
Numbered Buttons
Used to select a TV channel through the
VCR. Also, used to set the timer in the VCR,
and to enter programming information.
ENTER
Used with the numbered buttons to select a
TV channel through the VCR.
AM/PM
Used to set timer during programming.
MEMO RY
Used to activate the COUNTER
MEMORY
feature.
RECORD, STOP, PAUSE, REW,
PLAY and F FWD
Used for tape recording and playback
functions.
VCR
SELECT
QUIT
(i)®®
®®®
®®®
(EKD
RECORD
STOP
P_
PEW
_
F F'_
SC3820
MODE
Press to select VCR mode of operation.
OFF-ON
Used to turn VCR ON or OFF.
FL_S:HBK
(Flashback)
Press during
VCR playback
to view the
channel tuned by the VCR.
CHANNEL Up/Do_na
Used to select a TV channel by going
Up or Down through channels from
your VCR.
SEARCH
Press to operate the VCR SEARCH
feature which allow:; you to rewind or
fast forward to an i_Ldexed segment of
tape.
T%_CR
Used to select the source of the
programs seen on the TV. Switches the
VCR between TV mode, and VCR
mode. TV Mode: channels are selected
through the TV. VCR Mode: channels or
tape operations
are selected through the
VCR.
TIMER
Used to activate the SLEEP TIMER.
2598-B
7 --2

Advertisement

Table of Contents
loading

Table of Contents