Table of Contents
Advertisement
REMOTE CONTROL MODEL MBR3420
INTRODUCTION
The multi-brand remote control supplied with your new
Zenith TV allows you to operate most models of infra-red
(IR) remote-coutroUed
TVs, VCRs, and cable-TV
decoders, even if they are all different brands. In this way, it
takes the place of the several remote controls previously
needed.
Your multi-brand remote h_ already been programmed to
operate your new Zenith TV, a Zenith manufactured
cable-
TV decoder and a Zenith VHS VCR. It must be
programmed to operate other brands of equipment.
The following instructions axe fl)r operation of Zenith
equipment. The instructions; for using this remote with
non-Zenith equipment are in the section entitled "Program-
ming the Remote Control".
CHOOSING
OPERATING
MODE
To use the remote to operate your TV, a cable-TV decoder
or a VCR, you must first choose the mode of operation of
the remote control. To select the TV, CABLE or VCR
mode of operation,
press MODE repeatedly until the cor-
responding
indicator lights.
Some controls on the remote, like PLAY and VOLUME,
will always operate the VCR or the TV. Whether other keys
operate the TV or the VCR depends on w]_ich mode of
operation the remote control is in. For example, OFF-ON
will turn the, VCR on and off while the remote control is in
the VCR mode. It will turn the TV on or off while the
remote control is in TV mode.
Operating MODE switch
and indicators
Menu operations on TV
and some VCRs
Numbered
buttons for
channel selection and
other uses
NOTE: See following pages
for operating instructions.
WENU
SELECT
QUIT
Q®®
®®®
®®®
(Z)(-'-)
O
C:23
C::3
LEARN
A
B
_
C:23
O
WEWORY
"rIMER
CZZZ)(_EZ) CZEZ)
RECORD
STOP
(i_
(SLID (12ED
I_:W
PLAY
F FWD
OFF ON
©
SOURCE
©
CHANNEL
®
VOLUWE
®
CZD
CZD
SEARCH
C_
I'V/_:R
J
MBR3420
Controlled device OFF/ON
SF,ecial features on "IW and
some VCRs
Channel Up/Down
for TVs,
VCRs and cable
Volume Up/Down fl)r TV
Special features on some
TVs and some VCRs
2Sg_A
5 -- 1
Advertisement
Table of Contents
