Vcr Operations - Zenith SL2784BT Operating Manual And Warranty

REMOTE CONTROL MODEL LR4455
VCR OPERATIONS
The following functions and operations apply to Zenith
VCR models Lailt after 1988. The remote control supplied
with your VCR may have keys not duplicated on the new
remote. If these functions are desired, the original remote
control will have to be used.
For complete details on how to operate your Zenith VCR,
refer to the operating guide supplied with it.
The remote control must be in the VCR mode tooperate
your VCR.
MODE
Press repeatedly to select the
VCR mode of operation.
t
For optimum performance, point the
remote control toward your TV.
VCR
Lights when VCR mode of
operation is selected.
MENU, SELECT, ADJUST
and QUIT
Used with the on-screen menus
and programming options of the
VCR. See VCR operating guide
for details
Numbered Buttons
Used to select a TV channel
through the VCR. Also, used to
set the timer in the VCR, and to
enter programming information.
ENTER
Used with the numbered buttons to
select a TV channel through the
VCR.
AM/PM J
Used to set timer during
programming,
® ® ®
rJtttUD.
® @ ®
® ® ®
@J ENTER )
[_
CZ_ C_ CZ_
RECOI_ STOP _ _.tRCtt
RECORD, STOP, PAUSE, SEARCH, _..t_ i R4455
REW, PLAY and F FWD _VCR Operations
Used for tape recording and playback
functions. See the VCR operating guide
for details.
OFFION
Used to turn VCR ON or OFF.
/
FLASHBK (Flashback)
Press during VCR playback to view
the channel tuned by the VCR.
CHANNEL Up/Down
Used tmequenc_ through channels on
the VCR. Press CHANNEL Up or
Down to change to the next higher or
lower channel.
TIMER
/ Activates TIME RECORD on
some VCRs.
/
TVNCR
Used to select the source of the
programs seen on the TV. Switches
the VCR between TV mode and
VCR mode. TV Mode: channels are
selected through the TV. VCR Mode:
channels or tape operation are
selected through the VCR.
_
6 - 3