Get To Know The Remote Control; Introduction; Battery Installation; Choosing Operating Mode - Zenith SY3238 Operating Manual & Warranty

GET TO KNOW THE REMOTE CONTROL: MBR 3457
INTRODUCTION
The remote control provided with your new TV is a "multi-
brand" remote control. It will operate the common features of
most, but not all, models and brands of IR (infrared) control-
led TVs, VCRs, cable conveners, video disc players, and
audio equipment. The remote may provide functions that are
not available on your equipment, e.g., menu operations. Some
functions of your particular equipment may not be controlled
by this remote. In such cases, use the original remote control
for your equipment.
Mode Select Keys
Channel/Volume Changes
Number Keys
On-Screen Menu Functions
Picture-In-Picture Functions
VCR Functions
BATTERY INSTALLATION
Batteries are provided, but they must be installed before using the remote control. When it no longer functions normally, or when it
loses memory, replace the batteries with two high-quality, alkaline, size AAA batteries.
Unless your equipment responds to the factory preset codes commonly used for Zenith products, i.e.., 101 for TV, 201 fi)r VCR,
353 tot CABLE, and 401 for AUX., you will need to program the remote control with the codes for your particular equipment.
To Install the batteries:
1. Open the battery compartment by pressing in on the tab and lift-
" ing the cover off.
i2. Place the batteries into the compartment matching plus with
plus (+ with +), minus with minus (- with -) with the markings
shown in the battery compartment.
3. Replace the compartment cover.
NOTES:
U Do not to place heavy objects on top of the remote control
keys. Prolonged unintentional operation of the remote
shortens battery life.
Q Remove the batteries if the remote control will not be used
for a month or more. Battery leakage can permanently
damage the remote, for which Zenith is not responsible.
Push tab in ?_
CHOOSING OPERA TING MODE
To control your TV, VCR, cable box, or auxiliary equipment with
this remote, you must firstchoose the mode of operatiou. Press the
desired mode key for'IV, VCR, CABLE or AUX. Note that
some keys on the remote will always operate a particular product
function regardless of which mode the remote is set to.