Table of Contents
Advertisement
AUDIO
MENU
I
I
_
udio
Menu
[Bass
Treble
Balance
Audio Mode
Surround .I,
SoundRite
I f,
MENU
OPERATION
Press MENU repeatedly until the
Audio Menu is shown.
Press the Up or Down arrows undl
the desired option is selected.
fj_
"" "-,.
(ADJUST)
Press the Left or Right arrows to ad-
just the selected option.
Press QUIT or wait a few seconds for
the TV to return to nornl;.ll operation.
Menu Option
Function
Of Menu Option
Bass
Adjusts the BASS (low-frequency) level.
Treble
Balance
Audio Mode
Adjusts the TREBLE (high-frequency) level.
Adjusts the balance of sound between the two speakers.
Allows you to select Stereo, Mono or 2nd Audio/SAP speaker operation. See information below this chart for
more details.
Stereo:
Directs the sound to the Left and Right speakers as supplied by the program source (broadcast
TV, VCR, etc.)
Mono:
Directs the same sound to both Left and Right speakers, even if the program being received is in
stereo.
2nd Audio/
SAP:
Directs the sound for the Second Audio Program (second language) to both the Left and Right
speakers. SAP sound is always monaural. (SAP is not available while Video is chosen as the
viewing source: The audio signal being received from the auxiliary video source is assumed to be
either stereo or mono. )
Surround ,,_
Used to activate the "front" channel surroundsound decoder of the TV. You can then listen to front channel
surround sound audio from the TV's speakers. (Surroundsound audio will only be heard if the program being
watched is in stereo and is encoded with surround sound.)
SoundRite
Turn this feature ON to maintain the television's volume at a constant level. In other words, commercials and
audio from the auxiliary input source will no longer appear to sound louder than the volume level you have set.
NOTES:
17 Adjustments to the Audio Menu are optional. You do not have to adjust these features in order to use your TV.
I7 With "Stereo" as the selected Audio Mode, the TV switches automatically between Stere() and Mono sound depending on the
actual signal being received.
U3 With "SAP" as the selected Audio Mode, you hear the SAP (usually a second language) on those stations which broadcast two
audio signals. When the SAP broadcast ends, the TV switches automatically between Stereo and Mono modes. The TV
switches back to 2nd Audio/SAP when the SAP broadcast resumes.
7w!
Advertisement
Table of Contents
