Zenith SY3238 Operating Manual & Warranty page 29

PIP CONNECTIONS AND OPERA TION
OPTIONAL PICTURE-IN-PICTURE OPERA TION
With your equipment setup in this manner, your
television has the following PIP capabilities:
121 Simultaneously view a video tape playing in the
VCR and a basic cable channel selected by the TV's
tuner.
D Simultaneously view two different channels; one
basic cable channel selected by the TV's tuner and a
scrambled (premium) cable channel selected by the
decoder's tuner.
Fi Swap the main picture and the PIP inset.
NOTE:
O The cable channels you can view depends on the service
you have purchased from your cable company.
PIP VIEWING OPTIONS
Viewing Two Different
Channels
1 Select Main Source in the Source
Menu.
2. Press a Left/Rightarrow to select
Antenna/Cable.
3. Select PIP Source in the Source
Menu.
4. Pressa Left/Rightarrow to select
Video.
5. PressQUIT to remove the menu
from view.
6. Press PiP key to activate PIP.
7. Select a TV channel using the
TV's channel selector.
8. Select a PIP channel using the
cable box.
Viewing a Video Tape
and a TV Channel
1 Select Main Source in the Source
Menu.
2. Press a Left/Right arrow to select
Antenna/Cable.
3. Select PIP Source in the Source
Menu.
4. Press a Left/Right arrow to select
Video.
5. Press QUIT to remove the menu
from view.
6. Press PIP key to activate PIP.
7. Select a TV channel using the
TV's channel selector.
8. Play a video tape in the VCR
and view it in the PIP window.
VIDEO Source
Connect to the AUDIO/VIDEO
Input jacks.
TVBACK
Antenna/Cable
Source
Connect to the
ANTENNA/
CABLE jack.
VCRBAcK
Signal Splitter
(Purchased separately)
CABLE A
Option 2: Cable-TV Connection Direct to TV & Cable Box to VCR.
(Cables are not supplied with television.)
11 --3