Table of Contents
Advertisement
GET TO KNOW
THE REMOTE
CONTROL:
MBR 3457
A UTO FIND
OPTION
If you have tried all the codes listed in the code table for your brand and type of product,
and none of those codes operate
your
equipment, you can use Auto Find to search for the code you need.
Follow these steps for each product you are using:
To auto find a code:
1. Turn the product ON.
2. Press and hold PRG untl the indicator lights.
3. Press the mode key on the remote for the product you want to
control: "IV, VCR, CABLE, or AUX.
4. Enter code 0-0-0, then press ENTER. When the indicator light
flashes three times and remains lit, Auto Find is active.
5. Aim the remote toward the product and press and release
POWER, repeating this action until the product turns OFF.
6. Press ENTER immediately
to save the code. If your remote fails
operate the functions you use most often, you can re-enter Auto
Find and search for a better code.
NOT_:
t-I The indicator light should flash OFF when you press
POWER and back ON when you release it. If the indicator
light stays on when you press POWER, Auto Find has trie_
all available codes. If you finish Auto Find and the producl
you want to control has not turned off, your remote cannot
control that product.
121 Pressing PRG at any time during the use of Auto Find will
cancel Auto Find, and you will have to start again.
Equipment to be
controlled
Typical Remote
Control
Advertisement
Table of Contents
