Table of Contents
Advertisement
SETUP
MENU
USING
ADD/DEL/SURF
1.
2.
3,
4,
To Add Channels:
Added ChanneLs: Channels set to
"Added" are tuned when using the
CHANNEL
Up and Down arrow
keys. All channels which were found
by the Auto Program function are
initially set as "Added" channels.
Use the Up or Down arrow keys to
choose Add/Del/Surf.
Select a channel using the number
keys on the remote.
Use the Left/Right arrows to show
Added.
Press QUIT to remove the menu
from view.
To Delete Channels:
Deleted Channels:
These channels
are blocked from tuning when using
the CHANNEL Up and Down keys.
However, they may be tuned directly
by using the number keys on the
remote control.
1. Use the Up or Down arrow keys to
choose AddiDel/Surf.
2. Select a channel using the number
keys on the remote.
3.
Use the Left/Right arrows to show
Deleted.
4. PressQUIT to remove the menu
from view.
To Setup Surf Channels:
Surf Channels:
"SURF'
channels act as a list of favorite
channels, intended for your most frequently watched
channels. When the "SURF' mode is activated, these are
the only channels that wm be tuned while using the
CHANNEL Up and Down keys.
1. Use the Up or Down arrow keys to choose Add/Del/Surf.
2.
Select a channel using the number keys.
3.
Use the Left/Right arrows to show Surf.
4. Repeat steps 2 and 3 make your most frequently watched
channels "Surf" channels.
5. Press QUIT to remove the menu from view.
To activate "SURF' mode, press the SURF key on the
remote control.
[surf's upl
appearson the screen.
To deactivate "SURF," press SURF again.
[ No Surfing (_)1
appears on the screen.
USING
CHANNEL
LABELS
.
2.
3.
To assign
CHANNEL
LABELS:
Select Channel Labels.
Select a channel by using the number keys on the remote.
Use the Left/Right arrows to sequence through the choices until
the desired label appears. (Selecting the dashes specifies no
channel label.)
Auto Program
AdcVDel/Surf
Ch. Labels
]
Clock Set
"l]mer Setup
Parental CII
Caption/Text
Language
Auto Demo
[ Ch 2
1
TIMER
SETUP:
Sleep
Timer
The Sleep Timer
programs
the TV to automatically
turn itself off after a period
from 15 minutes
up to 4 hours.
From Setup Menu
1.' Make sure the TV's clock is set.
2.
Select Timer Setup and press a Left/Right
arrow to view the Timer Menu.
3.
Select Sleep Timer.
4.
Press a Left/Right arrow repeatedly to set
.
2.
Direct From Timer Button
i
m
Press TIMER on the remote control.
Press TIMER repeatedly to set the
period of time the TV will remain on.
the period of time the TV will remain on.
One minute before the TV turns off, the GOOD NIGH'I; display appears on the screen. At
this time you have a choice of the following two actions:
1. Do nothing. The TV will turn itself off in one minute.
2.
Delay the turn-off by pressing TIMER.
NOTES:
1_1 Before the Timer Menu can be viewed, you must set the time on the TV.
See "WHAT YOU SHOULD DO FIRST" in the operating guide.
F..I To cancel the SLEEP TIMER, turn off the TV or press the Timer button
repeatedly until OFF is showing.
ISloep "nrrmr ,
I
On Time
OIf'limo
On/OffTimer
:3O
Sleep Timer set to turn TV
off in 30 minutes.
I
"Good Night"
display appears
60 seconds
before shut-off.
_D2
Advertisement
Table of Contents
