What You Should Do First; Connect The Power; Install The Batteries Into The Remote Control; Get To Know Remote Control Basic Menu Operation - Zenith SYSTEM 3 SY2738RK Operating Manual & Warranty

WHAT YOU SHOULD DO FIRST
(_ CONNECT THE POWER
K
AFTER you have connected the necessary cable(s)to the I [_ ]
jacks on the back of the TV, plug your TV's power cord into l® I
an AC outlet. Make sure you do not plug the TV into a [_®J
"switched" outlet (an outlet that is controlled by a switch).
m i
II
m
(_ INSTALL THE BATTERIES INTO THE REMOTE CONTROL
If you have not already installed the batteries in the remote control, now is a good time to do so. Batteries are provided, but they
must be installed before it can be used.
Unless your equipment responds to the factory preset codes, you will need to reprogram the remote control with the codes of your
9articular equipment each time you replace batteries. Refer to Remote Control "Programming Options" for details.
To install the batteries:
1. Open the battery compartment by pressing in on the tab and lift-
ing the cover off.
2. Place the batteries into the compartment matching positive with
positive (+ with +), negative with negative (- with -) with the
markings shown in the battery compartment.
3. Replace the compartment cover.
NOTES:
I=1 Do not place heavy objects on top of the remote control
keys. Prolonged unintentional operation of the remote
shortens battery life.
I=l Remove the batteries if the remote control will not be used
for a month or more.
THE REMOTE
CONTROL MANUFAC-
TURER
IS NOT RESPONSIBLE FOR DAMAGE CAUSED BY
BATI'ERY LEAKAGE.
_ ] Push tab In to
JL_]_ J remove cover
Do not plug TV into switched outlet on a
VCR or cable-TV decoder
Multi-Brand Remote Control
(_ GET TO KNOW REMOTE CONTROL BASIC MENU OPERATION
Note: You can also use the TV Control Panel to select and ad-
just the on-screen menus. However, not all the TV's features
are available when using the TV Controls.
Use the remote control to access menus:
1. Point remote at TV. Press TV.
PressMENU repeatedlyto view the available menus.
Select a menu.
2. Press Up orDown arrow repeatedlyto move highlight bar to
select a menu option.
3. Use the Left or Right arrow to adjust the selected option.
4. Press QUIT to remove the menu from screen.
3130A-O 3 -- 1