Table of Contents
Advertisement
GETIING TO KNOW YOUR TV (CONTINUED)
THE REMOTE CONTROL UNIT
Your new Zenith remote control unit comes
programmed to use with your Zenith TV, a VCR and
Cable-TV Decoder. However, it can be programmed to
operate other brands of VCRs and Cable-TV decoders.
See the section "Using the Remote Control" for remote
control programming instructions as well as a more
detailed explaination of remote control operation.
Note:
The buttons on the remote control unit which have
the same name as those on the TV control panel operate
as the TV controls described in "Front Panel Controls."
II!I
TV/CABLFJVCR Switch
Set this switch to the "TV" position to operate your
Zenith TV.
m
Menu Buttons
Use these buttons during the menu operations.
JACKPANEL
The jack panel lets you connect a variety of audio/video
components to your TV. Some of the components you
can connect include VCRs, camcorders, home video
games, video disc players, stereo receivers, and Super
VHS (S-VHS) VCRs.
This page outlines the auxiliary jack panel and lists some
of the uses of each jack. For a more detailed description
of the jack panel and its uses, see "Connections For Your
TV" section of this operating guide.
m
75-OHM
RF
ANTENNA-TYPE CONNECTIONS
Attach your antenna or cable TV line to these jacks.
The input cables may come from the outdoor or
master antenna, cable TV line, cable decoder box
or RF antenna output from a monaural VCR.
m
AUXILIARY A-V INPUT/LOOP
Use these jacks to receive audio/video signals from
other components, such as a stereo VCR (both
audio and video), a stereo receiver/amplifier
(audio), a video disc player ( audio and video) or
other audio sources (audio).
Use the audio and video loop-out jacks to send the
incoming audio and video signals to another
component such as second VCR, a TV monitor or
stereo receiver.
m
FIXED A-V OUTPUT
Use these jacks to send a fixed audio level and a
fixed video level to another component, such as a
VCR for recording purposes.
1-2
GJ
0 0
m
@
"'-
[!]
~
00
0 0 0
UlllP TO
DECODER
CABLE
ANT EM
DECODER
FllED A-U
OUTPUT
VIDEO
ll&IIT
LEFT
000
o~o
D~
UIDE(ill)D
,-c
llT S
oc,o
u.
EIT
II&IIT
LEFf
00
VARIABLE AUDIO
!PUT
llvARIABLE
AUDIO OUT JACKS
Audio signals from the TV can be sent to external
speakers or sound amplification equipment. With
the SPKR switch in the "EXT" ( external) position,
the TV speakers are turned off. With the SPKR
switch in the "INT" (internal) position, the TV
speakers are turned on. In either case, use the TV
remote control to adjust the volume level provided
to the RIGHT and LEFT output jacks.
Advertisement
Table of Contents
