Sequence Programming (On Some Models) - Whirlpool SF367LXSQ0 Use & Care Manual

Style I - Series Electronic Controls (see "Electronic Oven
Controls" section)
To Set a Timed Cook:
1. Press BAKE (optional).
2. Press the TEMP "up" or "down" arrow pads to enter a
temperature other than the one displayed.
3. Press STOP TIME.
4. Press the HR and MIN "up" or "down" arrow pads to enter
the desired time to end cooking.
5. Press START. The display will count down the time.
When the time ends, the oven will shut off automatically and
"End" will appear on the display. End-of-cycle tones will
sound, then, if enabled, reminder tones will sound every
minute.
6. Open and close the oven door to clear the display and/or
stop reminder tones.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. Press desired cook function.
2. Press the TEMP "up" or "down" arrow pads to enter a
temperature other than the one displayed.
3. Press START TIME or DELAY START TIME.
4. Press the HR and MIN "up" or "down" arrow pads to enter
the time of day to start.
5. Press STOP TIME (optional).
6. If STOP TIME has been pressed, press the HR and MIN "up"
or "down" arrow pads to enter the desired time to end
cooking.
7. Press START. "DELAY" will appear on the display.
When the start time is reached, the oven will automatically
turn on. When the stop time is reached (if programmed), the
oven will shut off automatically and "End" will appear on the
display. End-of-cycle tones will sound, then, if on, reminder
tones will sound every minute.
8. Open and close the oven door to clear the display and/or
stop reminder tones.
Style 2 - Series Electronic Oven Control (see "Electronic
Oven Controls" section)
To Set a Timed Cook:
1. Press BAKE. The bake indicator light will light up.
2. Set the temperature (optional).
3. Press the TEMP/HOUR "up" or "down" arrow pad to enter a
temperature other than the one displayed.
4. Press COOK TIME. The cook time oven indicator light will
light up.
5. Press TEMP/HOUR "up" or "down" arrow pad to enter the
length of time to cook.
6. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically and "End" will
appear on the display.
7. Press OFF/CANCEL or open the oven door to clear the
display.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. Press BAKE.
2. Set the temperature (optional).
3. Press the TEMP/HOUR "up" or "down" arrow pad to enter a
temperature other than the one displayed.
4. Press COOK TIME. The cook time oven indicator light will
light up.
5. Press the TEMP/HOUR "up" or "down" arrow pad to enter
the length of time to cook.
6. Press START TIME. The start time/delay oven indicator light
will light up.
7. Press the TEMP/HOUR "up" or "down" arrow pad to enter
the time of day to start.
8. Press START.
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be
changed any time after pressing START by repeating steps 1-
7. When the set cook time ends, the oven will shut off
automatically and "End" will appear on the display.
9. Press OFF/CANCEL or open the oven door to clear the
display.
©
Sequence Programming allows you to program up to 4 cooking
functions at one time. Other oven functions, such as the Timer
and Warming Drawer, may be used when a sequenced Program
is running.
All steps of a sequenced program must be programmed with a
stop time. If a stop time is not entered for a step in the sequence
program, and the FIRST/NEXT STEP pad is pressed, 3 tones will
sound prompting you to enter a stop time.
Sequence Programming takes precedence over any
nonsequenced cooking function. For example, if an untimed
Bake function is in process and a sequence program is started,
the untimed Bake function will be canceled, and the program
sequence will start.
Example - Sequence Programming
To Program the First Step of the Sequence:
1. Press FIRST/NEXTSTER
"PROGRAM" and "STEP" will appear on the display. A
flashing "1" will also appear on the display, indicating that
Step 1 is being programmed.
2=
3.
Press BAKE, or any other desired cooking function.
Press TEMP or TEMP/HOUR "up" or "down" arrow pad (if
desired) to select a temperature other than the one displayed.
Press START TIME, then HR and MIN "up" or "down" arrow
pads to set the time of day for the first cooking function to
begin. For example, 1:00.
If START TIME is not pressed, then the sequence of cooking
functions will begin immediately once programming is
complete and START is pressed.
The display will show either the time of day (if start time was
not programmed) or the start time (if same was programmed),
but with a flashing colon. "Stop" and "Time" will also appear
on the display.
5. Press STOP TIME, then HR and MIN or TEMP/HOUR "up" or
"down" arrow pads to set the time of day for the first cooking
function to stop. For example, 1:15.
13