Assembly - Weslo PURSUIT CT 3.8R User Manual

ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver _-_, two adjustable
wrenches Q_, and pliers _.
As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The
number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small
parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been pre-
assembled. If a part is missing, call t-888-533-t333.
M4 Washer M6 Washer M6 Curved M8 Split M8 Washer M8 Curved
(70)-2 (68)-8 Washer (69)-4 Washer (42)-3 (54)-4 Washer (46)-2
M6 Locknut
(63)-4
M4x 5mm M4 x8mm M4x 15mm
M8 Locknut MIO Locknut Self-tapping Screw (29)-2 Self-tapping
(10)-4 (65)-2 Screw (66)-2 Screw (47)-4
M6 x 30ram Button
Bolt (64)-4
M6 x 35mm Button
Screw (61)-8
M8 x 65ram Button Bolt (72)-2
M8 x 20ram Button
Screw (34)-3
M8 x 125mm Bolt (62)-2
MIO x 60mm Button Screw (33)-2 MIO x 75mm Carriage Bolt (30)-2
5