Advertisement
57. Attach the Seat (16) to the Seat Frame (8) with two
114"x 3/4" Screws (114), a 1/4" x 2 1/2" Screw (99),
and a 1/4" Washer (97).
58. Attach the Butterfly Backrest (15) to the Butterfly
Updght (3) with four 1/4" x 3/4" Screws (114).
59. Wet one end of the Squat Arm (32) with soapy
water. Slide a Short Pad (20) onto the Squat Arm
as shown.
Slide two Nut Clips (108) onto a Squat Handle (33).
Attach the Squat Handle to the Squat Arm (32) with
two 5/16" x 3/4" Button Head Screws (51). Slide an
Inner Cap w/Hole (111) onto the Squat Handle and
press it ontothe end of the Squat Arm. Wet the
Squat Handle with soapy water. Slide an 8"
Handgrip (84) onto the Squat Handle.
Repeat this step with the other end of the Squat
Arm (32).
60. Attach the Squat Arm (32) to the Squat Bracket (37)
with two 3/8" x 2 1/2" Carriage Bolts (106), two 3/8"
Washers (91), and two 3/8" Nylon Locknuts (87).
Do not tighten the Nylon Locknuts yet.
Finish attaching the Squat Arm (32) to the Squat
Bracket (37) with a 3/8" x 3" Bolt (107), a 3/8"
Washer (91), and a 3/8" Nylon Locknut (87).
Tighten all of the 3/8" Nylon Locknuts (87) used
In this step.
57
58
114
59
,114
60
2O
51
111
84
107
87
,_=e_ 91
32
87
37
2O
Advertisement
