Extreme Networks ExtremeWare XOS Guide Manual page 26

Accessing the Switch
Table 5: Common Commands (continued)
Command
configure banner
configure ports <port_list> auto off {speed [10 | 100
| 1000]} duplex [half | full]
configure slot <slot> module <module_type>
configure time <month> <day> <year> <hour>
<min> <sec>
configure timezone {name <tz_name>}
<GMT_offset> {autodst {name <dst_timezone_ID>}
{<dst_offset>} {begins [every <floatingday> | on
<absoluteday>] {at <time_of_day>} {ends [every
<floatingday> | on <absoluteday>] {at
<time_of_day>}}} | noautodst}
configure vlan <vlan_name> ipaddress <ipaddress>
{<ipNetmask>}
create account [admin | user] <account-name>
{<password>}
create vlan <vlan_name>
delete account <name>
delete vlan <vlan_name>
disable bootp vlan [<vlan> | all]
disable clipaging
disable idletimeout
disable port [<port_list> | all]
disable telnet
enable bootp vlan [<vlan> | all]
enable clipaging
enable idletimeout
history
show banner
26
Description
Configures the banner string. You can enter up to 24 rows
of 79-column text that is displayed before the login prompt of
each session. Press [Return] at the beginning of a line to
terminate the command and apply the banner. To clear the
banner, press [Return] at the beginning of the first line.
Manually configures the port speed and duplex setting of
one or more ports on a switch.
Configures a slot for a particular I/O module card.
Configures the system date and time. The format is as
follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You cannot set the
year past 2036.
Configures the time zone information to the configured offset
from GMT time. The format of gmt_offset is +/- minutes
from GMT time. The autodst and noautodst options
enable and disable automatic Daylight Saving Time change
based on the North American standard.
Additional options are described in the ExtremeWare XOS
Command Reference Guide.
Configures an IP address and subnet mask for a VLAN.
Creates a user account. This command is available to
admin-level users and to users with RADIUS command
authorization. The username is between 1 and 30
characters, the password is between 0 and 30 characters.
Creates a VLAN.
Deletes a user account.
Deletes a VLAN.
Disables BOOTP for one or more VLANs.
Disables pausing of the screen display when a show
command output reaches the end of the page.
Disables the timer that disconnects all sessions. After being
disabled, console sessions remain open until the switch is
rebooted or you logoff. Telnet sessions remain open until
you close the Telnet client.
Disables a port on the switch.
Disables Telnet access to the switch.
Enables BOOTP for one or more VLANs.
Enables pausing of the screen display when show
command output reaches the end of the page. The default
setting is enabled.
Enables a timer that disconnects all sessions (both Telnet
and console) after 20 minutes of inactivity. The default
setting is disabled.
Displays the previous 49 commands entered on the switch.
Displays the user-configured banner.
ExtremeWare XOS 10.1 Concepts Guide