Advertisement
The RF Statistics screen displays the following:
Radio
Signal
SNR
Tx Physical Layer
Rate
Rx Physical Layer
Rate
Avg Retry Rate
Error Rate
Traffic Index
RF Quality Index
Refresh
Traffic Statistics
To view RF Domain member access point radio traffic statistics:
1 Select the Statistics menu from the Web UI.
2 Select the default item from under the System node on the top, left-hand side, of the screen.
3 Expand Radios from the RF Domain menu and select Traffic Statistics.
TM
Altitude
4000 Series Access Point System Reference Guide
Displays the name assigned to each listed RF Domain member access
point radio. Each name displays as a link that can be selected to display
radio information in greater detail.
Displays the power of each listed RF Domain member access point radio
signals in dBm.
Displays the signal to noise ratio of each listed RF Domain member access
point radio.
Displays the data transmit rate for each RF Domain member radio's
physical layer. The rate is displayed in Mbps.
Displays the data receive rate for each RF Domain member radio's
physical. The rate is displayed in Mbps.
Displays the average number of retries for each RF Domain member radio.
Displays the average number of retries per packet. A high number indicates
possible network or hardware problems.
Displays the traffic utilization index of each RF Domain member access
point radio. This is expressed as an integer value. 0 – 20 indicates very low
utilization, and 60 and above indicate high utilization.
Displays an integer that indicates overall RF performance for the radio. The
RF quality indices are:
• 0 – 50 (Poor)
• 50 – 75 (Medium)
• 75 – 100 (Good)
Select the Refresh button to update the statistics counters to their latest
values.
RF Domain
441
Advertisement
