Extreme Networks Altitude 4000 Series Reference Manual page 65

and the budget available to the access point. The CPLD also determines the access point hardware SKU
(model) and the number of radios.
If the access point's POE resource cannot provide sufficient power to run the access point (with all
intended interfaces enabled), some of the following interfaces could be disabled or modified:
The access point's transmit and receive algorithms could be negatively impacted
●
The access point's transmit power could be reduced due to insufficient power
●
The access point's WAN port configuration could be changed (either enabled or disabled)
●
To define an access point's power configuration:
1 Select the Configuration tab from the Web UI.
2 Select Devices.
3 Select System Profile from the options on left-hand side of the UI.
4 Select Power.
A screen displays where the access point profile's power mode can be defined.
5 Use the Power Mode drop-down menu to set the Power Mode Configuration on this AP.
NOTE
Single radio model access point's always operate using a full power configuration. The power management
configurations described in this section do not apply to single radio models.
TM
Altitude 4000 Series Access Point System Reference Guide
System Profile Configuration
65