Selecting The Optical Audio Output Format; Selecting The Audio Out Sound - Toshiba 57H93 Owner's Manual

Adjustingthe audio
[continued)
Turning off the built-in speakers
Use this feature to turn off the TV speakers when you connect
an audio system to your TV (see "Connecting a digital audio
system" and "Connecting an analog audio system" on page 19).
To turn off the built-in speakers:
1. Press MENU and open theAUDIO menu.
2. Highlight AUDIO SETUP and press ENTER.
MTS
Language
Speakers
_udio0ut 4[_)
Idli
9ptical0utputFormat _)
3. Press • to highlight the SPEAKERS field, and then
press I_" to select OFE
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To turnonthebuilt-in speakers:
Select ON in step 3 above.
Selecting the AUDIO OUT sound
This feature allows you to select the audio source (MAIN or
POP) that is output fi'om the AUDIO OUT jacks.
This is useful when amplifying or recording the POP sound
with external equipment while hearing the sound of the main
picture through the TV's built-in speakers.
To select the Audio OUT sound:
1. Press MENU and open the AUDIO menu.
2. Press • to highlight AUDIO SETUP and press ENTER.
3. Press • to highlight the AUD10 OUT field, and then
press • or I1_ to select MAIN or POP.
- MAIN: Outputs the sound of the main program through
the AUDIO OUT jacks.
- POP: Outputs the sound of the POP program through
the AUDIO OUT jacks.
Selecting the optical audio output
format
Use this feature to select the optical audio output format when
you connect a Dolby Digital decoder or other digital audio
system to the OPTICAL AUDIO OUT jack on the TV (see
"Connecting a digital audio system" on page 19).
To select the optical audio output format:
l. Press MENU and open theAUDIO menu.
2. Highlight AUDIO SETUP and press ENTER.
3. Press • to highlight the OPTICAL OUTPUT FORMAT
field, and then press I_" to select either DOLBY DIGITAL
or PCM, depending on your device.
MTS _
Language _
Speakers _
AudioOut _1_
OpticalOuDutFormat_
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
_TS
Language
Speakers _)
_udio Out
_Rlm
OpticalOutput F ormat _
s_ [_ _
MTS _
Language _
Speakers _
ml
Audio Out
OpticalOutput F ormat _
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
Note:
• Whenthe POPwindowis not open, the soundof the rna_n program is
ouZout t l?roughLheAUDIO OUT]aeks,evenffPOPIsselectedin the
AUDIO OUTmenu
• Thesound of the ma/o program is alwaysoutpugthrough the TV
speakers,regardlessof the AUDlO OUT setbng
Copyright © 2003 TOSHIBA CORPORATION A_Irights reserved
79