Toshiba 57H93 Owner's Manual page 30

Programming the remotecontrolto operateyourotherdevices
[continued}
Using the volume lock feature [8000]
For the TV, CABLE/SAT, VCR, and DVD modes, the volume
controls (VOL A/V and MUTE) can be locked to the selected
device mode. This feature does not apply to the AUDIO 1 and
AUDIO 2 modes.
To lock the volume controls to always control the
CABLE/SAT device volume (for example):
1. Repeatedly press MODE to select CABLE/SAT mode.
2. While holding down the RECALL button, press 8 - 0 - 0 - 0.
3. Press VOL A.
The CABLE/SAT mode light will blink two times (locked).
To reset the volume controls to the original device mode:
1. While holding down RECALL, press 8 - 0 - 0 - 0.
2. Press VOL V.
The mode light will blink four times (unlocked).
Operational feature reset [8900]
This feature clears all setup features not related to "Device code
set up" and resets the Volume Lock to "TV."
To reset the features:
While holding down the RECALL button, press 8 -9-0 - 0.
The Mode indicator will blink two times, and then pause
and blink two more times.
_ --POWER
_)®®_
(_) (_) _) -- Numbers
_+,,® ®
MODE
,,, _al/-_- _
-- RECALL
.i w :,14
Copyright © 2003 TOSHIBA CORPORATION All rights reserved
31