Using Speedsurf To Change To A Specific Programmed Channel; Switching Between Two Channels Using Channel Return - Toshiba 57H93 Owner's Manual

Tuning channels
Tuning to the next programmed channel
Note: Thisfeature wi/Inot work un/e_ you p/agram ehanne/s
mzotile TV'sehannd memory (seepage 42)
To tune to the next programmed channel:
Press CHANNEL • or • on the remote control or TV
front panel.
Using SpeedSurf to change to a
specific programmed channel
Note: Thisfeature wi/Inot work un/e_ you p/agram ehanne/s
in_otile TV'sehannd memory (seepage 42)
1. Press and hold CHANNEL • or • for a few seconds. The
TV will enter SpeedSurf mode.
Upper channels
t
-- Current channel (highlighted)
Lower channels
Channel label
2. Repeatedly press or hold CHANNEL • or • while the
SpeedSurf mode is on-screen to scroll through the channel
list. Release rbe button to display the highlighted channel.
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press rbe Channel Number buttons (0-9) on rbe remote
control. For example, to select channel 125, press 1, 2, 5.
Tuning digital channels:
Press rbe Channel Number buttons (0-9) on rbe remote
control, followed by the - (dash) button and then the
sub-channel number.
For example, to select digital channel 125-1,
press 1, 2, 5, -, 1.
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels witbout entering an actual channel number each time.
1. Select rbe first channel you want to view.
2. Select a second channel using rbe Channd Number buttons
(and tbe dash (-) button if selecting a digital channel).
3. Press CH RTN on the remote control. The previous
channel will display.
Each time you press CH RTN, the TV will switch back and
fortb between tbe last two channels tbat were selected.
o®®
®®®_
G®®
CH RTN
-- ChannelNumbers
-- (dash}
CHANNEL A/_'
CHANNEL T CHANNELA
TVfrontpanel ] ]
NIENU V OLOI_E CHANNEL EXIt W/VtD_O To_gh_og_
Copyright © 2003 TOSHIBA CORPORATION A_Irights reserved
63