Blocking Channels; Unlocking Programs Temporarily; Lockingvideoinputs - Toshiba 57H93 Owner's Manual

Blocking channels Unlocking programs temporarily
With tbe CHANNELS BLOCK feature, you can block specific
channels. You will not be able to tune locked channels unless
you clear the setting.
To block channels:
1. Press MENU and highlight the LOCKS menu icon.
2. Press •, which displays the PIN code entering screen.
3. Enter your four-digit PIN code (see page 84 for details).
4. Press • to highlight CHANNELS BLOCK and tben press
ENTER.
EnaNeRating Blocking..On_
Edit Rating Limits
inputLock.............. Of
Front PanelLock ........ Of
Game Timer ............ Off
New HN Code
5. Press A•, • to highligbt the channel you want to block,
tben press ENTER, which puts an X in the box next to that
channel.
A
OB:3 DB:5 DA:5 1DA:5 2
A:53 mA:,_4 DA:5 5 DA:6
II II II I_
_B:6 1DB:6 2DB:10-1DB:102_
II II II II Save
_ B:10-3D B:#4 D B:10_5 DA: 11
6. Repeat step 5 for otber channels you want to block.
7. Highlight SAVE and press ENTER.
To unlock individual channels:
In step 5 above, press A•, • to highligbt the channel you
want to unblock, and then press ENTER to remove the X
from tbe box.
To block all channels at once:
Higblight BLOCK ALL in step 5 above.
To unlock all locked channels at once:
Highlight ALLOW ALL in step 5 above.
A
DB:3 DB:5 DA:5 1DA:5 2
[] A:53DA:54 DA:_5 DA:6
DB:6 1DB:6 2DB:10-1DB:10_
I II II II II Savo I
D B:_BD B:10-4 D B:_5 DA: 11 _
"v"
If you try to watch a TV program that exceeds the rating limits
you set, the TV enters program lock mode.
You can eitber unlock tbe program temporarily or select a
non-locked program to watch.
This programexceedsthe rating limit you set.
Push'mute' to enter PiN.
To temporarily unlock the program:
1. Press MUTE.
2. Enter your four-digit PIN code and press ENTER.
If the correct code is entered, tbe program lock mode is
released and tbe normal picture appears. All locking is
disabled until the TV is turned off, and will be enabled
when the TV is turned on.
Lockingvideoinputs
You can use the INPUT LOCK feature to lock tbe video input
sources (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD-1,
ColorStream HD-2, DVI/HDCP) and channels 3 and 4.
You will not be able to view the input sources or channels until
you turn off the input lock.
To lock the video inputs:
1. Press MENU and highlight the LOCKS menu icon.
2. Press • to display the PIN code entering screen.
3. Enter your four-digit PIN code and press ENTER.
4. Press • to highlight INPUT LOCK and press ENTER.
5. Press • to select the level of video input locking you prefer,
as described bdow:
VIDEO: Locks VIDEO 1,
VIDEO 2, VIDEO 3,
ColorStream HDI/HD2,
and DV1/HDCP.
VIDEO+: Locks VIDEO 1,
VIDEO 2, VIDEO 3,
ColorStream HD-1/HD-2,
DVI/HDCP, and cbannels
3 and 4. Select VIDEO+ if
you use the antenna terminal to play a video tape.
Note: Makesure_he POP isnotonchannd3 o/4
EnableRating BIocking..Off_ T
Edit Rating Limits
mm
ChannelsBlock Video+
Front Panel Lock........ Off
GameTimer............ Ofl
New PiN Code
OFF: Unlocks all video input sources.
86
Copyright © 2003 TOSHIBA CORPORATION All rights reserved