Table of Contents
Advertisement
This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba
REGZA-LINK compatible equipment from the television's remote control.
Note: Not all Toshiba products currently support REGZA-LINK.
Equipment Control
The REGZA-LINK mode on the television's
remote control allows the control of connected
REGZA-LINK equipment being watched.
To control the REGZA-LINK input source, first
select the equipment with REGZA-LINK input
source selection, then switch the mode on the
remote control to REGZA-LINK and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote con-
trol keys may be available. Please refer to the
operation manual for each piece of equipment
connected.
Note: The television features that can be con-
trolled by the connected equipment are:
Standby, Volume, Channel, Sound Mute,
Display Information, Number Buttons
and Previous Programme.
Input Source Selection
When any equipment using CEC technology is
connected, the REGZA-LINK icon will appear
in the input source list allowing selection of
individual devices.
Press
. A list will appear on screen
showing modes and all stored external
equipment.
Source Selection
0. ATV
1. DTV
2.
1
3.
2
4. HDMI 1
5. HDMI 2
: Select
REGZA-LINK Controls
OK : Enter
36
The REGZA-LINK icon appears auto-
matically after detected with REGZA-
LINK compatible equipment. Press ▼ to
highlight the input source shown with the
REGZA-LINK icon.
Source Selection
0. ATV
1. DTV
2.
1
3.
2
4. HDMI 1
5. HDMI 2
: Select
Press ►. A second selection screen will ap-
pear showing all connected REGZA-LINK
equipment.
Press ▲ or ▼ to highlight an input
source, and then press
Note 1: When the television is switched on, it
will take a few minutes for the REGZA-
LINK icon to appear in the list, when
an HDMI cable is removed, it will take
a few minutes for the logo to disap-
pear.
Note 2: If the HDMI cable from the connected
equipment is changed, or HDMI equip-
ment settings are changed, the Enable
REGZA-LINK in the REGZA-LINK
setup menu may need to be reset to
On.
Note 3: When the REGZA-LINK input source
is selected, some REGZA-LINK equip-
ment may automatically switch on.
REGZA−LINK
OK : Enter
to select.
Advertisement
Table of Contents
