Step 3A: Connecting The Components With Hdmi Jacks - Sony HT-CT500 Operating Instructions Manual

Step 3a: Connecting the components with HDMI jacks

Sony recommends that you connect components to the system using HDMI cables.
With HDMI, you can easily enjoy both high quality sound and high quality images.
For details on the Control for HDMI function, see "What is "BRAVIA" Sync?" (page 59).
Connecting a TV monitor, projector, etc.
Connect the audio output of the TV to the audio input of the system using a digital optical cord or an
audio cord in order to listen to the TV sound from the system.
Tip
• For details on connecting the TV without an HDMI jack, see "Step 3b: Connecting the components without HDMI
jacks" (page 29).
26
GB
TV monitor, projector, etc.
Audio signal
or
A
BD IN
ONLY FOR SS-CT500
L
CENTER
R
SPEAKER
DMPORT
A Audio cord (not supplied)
B Digital optical cord (supplied)
C HDMI cable (not supplied)
Audio/video
signal
B
FM
75 COAXIAL
EZW-T100
DVD IN SAT/CATV IN TV OUT
OPTICAL
TV IN VIDEO 2 IN VIDEO 3 IN
DIGITAL
VIDEO IN COMPONENT VIDEO IN
ASSIGNABLE
L L
DC 5V ONLY FOR
0.7A MAX SS-CT500
R R
AUDIO IN AUDIO IN
REMOTE
CTRL TV VIDEO 1 VIDEO 2 VIDEO 3
C
Rear of the
AM
subwoofer
ANTENNA
HDMI
COAXIAL
VIDEO 3 IN
Y
P /
B
C
B
P /
R
C
R
: Signal flow