Changing the display
You can check the sound field, etc., by
changing
tile information
on tile display.
Be sure to use the button on the receiver
for
this operation.
Press DISPLAY repeatedly.
Each time you press the buttou,
tile display
changes
cyclically
as t_llows.
All inputs except the FM and AM
band
Index name of the input* -_ Selected
input -_
Sound field currently
applied
FM and AM band
Preset station name* _
Frequency
_
Sound
fiekt currently
applied
": Index name appears only when you have assigned
one to the input or preset station (page 46, 47).
Index imme does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Usingthe SleepTimer
You can set the receiver
to turn off
automatically
at a specified
time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button,
the disphty
changes
cyclically
as follows:
2-00-00 --+ 1-30-00
_
1-00-00
_
0-30-00
OFF
When Sleep Timer is being used, "SLEEP"
lights up on the display.
Tip
To check the remaining time belore the receiver
turns ofLpress SLEEP.The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
48us