Listening To Fm/Am Radio - Sony HT-DDW700 Operating Instructions Manual

Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 18).
Tip
The tuning scale is:
FM: 100 kHz
AM: l0 kHz ,_
'The AM tuning scale can be changed (page 56).
i !!ii !:i i i i!iiiili iiiiiiiii!i!ii!ilili !;ili!ii
t
MUS -- II
MODE
i#_
-2
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press TUNING + or TUNING -.
Press TUNING + to scan from low to
high; press TUNING to scan from high
to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
It'the FM stereo reception is poor and
"STEREO" flashes on the display, select
monaural audio so that the sound will be less
distorted.
Press FM MODE repeatedly until the
"MONO" indicator lights up on the display.
To return to stereo mode, press FM MODE
until the "MONO" indicator on the display do
not light up. =-I
-1
,,,i
O
o
Enter the frequency of a station directly by
using the nmneric buttons. _"
i
2
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
Press D.TUNING.
continued
43us