Levels And Bahmce - Sony HT-DDW700 Operating Instructions Manual

Warning code and solution
Warning Explanation Solution
code
WARN. 40 The emdronmeut Make sure the
is noisy, euviroruneul is
quiet during Auto
Calibration.
WARN. 50 The center speaker Be sure to connect
is not connected, the center speaker.
WARN. 51 The surround Be sure to connect
speakers
are not the S/UTO/lnd
connected, speakers.
WARN. 60 The h'oul speakers Repositiou yuur
balance are out of fi'ont speakers, c)
range.
WARN. 62 The center speaker Repositiou your
level is out of center speaker, d/
range.
WARN. 63 The surround left Repositiou your
speaker level is oul surround left
of range, speaker, e>
WARN. 64 The surrouudright Reposition your
speaker level is out surround right
el range, speakerJ )
WARN. 71) The froul speakers Repositiou yuur
distance
are oul of ['rout
speakers,c)
range.
WARN. 72 The center speaker Repositiou your
distance is out of center speaker, d/
range.
WARN. 73 The surround left Repositiou your
speaker distance is surround left
out of range, speaker, e)
WARN. 74 The surround right Reposition your
speakerdislauce is surround right
OUl ()[" range,
speaker.0
C)For details, reli:r "Front speaker distance"
(page 34).
dYFor details, relier "Center speaker distance"
(page 34).
e/For details, relcr "Surround lelt speaker distance"
(page 35).
I) For details, refer "Surround right speaker
distance" (page 35).
7: Adjusting thespeaker
levelsand balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
"rip
The receiver employs a test tone with a frequency
centered at 800 Hz.
2-5
MASTER
,4
! Press AMP MENU.
"1-LEVEL" appears on the display.
2
Press the control button or
control button, to enter the
menu.
3
Press control button 4,1,!,
repeatedly to select "T. TONE".
4 Press the control button or
control button, to enter the
parameter.
5"
t_
continued_
23us