Andthe Remote; Settings; Sound - Sony HT-DDW700 Operating Instructions Manual

5: Preparingthe receiver
andthe remote
Connect the AC power cord to a wall outlet.
AC power cord
if)
Before using the receiver for the first time,
initialize the receiver by performing the ,,',
l\_llowing procedure. This procedure can also
be used to return settings you have made to
their factory defaults. ,',
Be sure to use the buttons on the receiver for
this operation.
1,2
To the wall outlet
Note
Inst_dl this system st) th_lt the power cord (.'}ill b e
unplugged from the wall socket immediately in the
event of trouble.
1
2
Press I/_ to turn off the
receiver.
Hold down I/_ for 5 seconds.
After "CLEARING" appears on the
display for a while, "CLEARED"
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO and SYSTEM
nlenus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names
t_r inputs and preset
stations.
• MASTER VOLUME is set to "VOL
MIN".
• Input is set to "DVD".
1gUs