Sony HT-DDW700 Operating Instructions Manual page 13

You can install your front and surround
speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hole on
the back of each speaker as
shown in the illustrations
below.
...................... more than 5/32 inch
more than 1 inch
2
Holeon the back of the speaker
Fasten the screws to the wall.
The screws should protrude to
7/32 to 9/32 inch.
3 Hang the speakers on the
screws.
Hole on the back of the speaker
Notes
• Use screws that are suitahle for tile wall material
and strength. As a plaster board wall is especially
li'agile, attach the screws securely to a beam and
fastml thmn to the wall. lnstall the speakers on a
vertical and flat wNl where reinlorcement is
applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible lk_raccident or damage
caused by improper installation, insufl]cient wall
strength or improper screw installation, natural
calamity, etc.
if)
I'D
5'
e_
13us