Adjusting The Exposure For Backlit Subjects; Recording In Mirror Mode; Selecting The Aspect Ratio (16:9 Or 4:3) Of The Recording Picture - Sony DCR-HC48 Operating Manual

WIDE SELECT POWER switch
To adjust tile exposure for backlit subjects,
press BACK LIGHT to display r_l. To
cancel the back light function, press BACK
LIGHT again.
Open Ihe LCD panel 90 degrees to Ille
camcorder ((&)), then rotate it 180 degrees
to the lens side ((_)).
"_° Tips
• A mirror-linage ol the subjecl appears on the
LCD screen, bul the image will be normal when
recorded.
Selecting the aspectratio for mowes
(_) Set the POWER switch to CAMERA-
TAPE.
@
Press WIDE SELECT
repeatedly
to
select the desired screen aspect ratio.
"_° Tips
• Dillhrences between 4:3 and 16:9 image _iews
vary depending on lhe zoom posilion when
recording.
• If you play back a picture on TV, set [TV
TYPE] lot playback in the w,pect rado of the
TV lP- 33).
• When viewing pictures recorded in 16:9 aspect
rado with [TV TYPEI set to [4:31, pictures may
appeal: rough depending on the subject (p. 33).
Selecting the aspectratio for still
images
(_) Set the POWER s'aitch to CAMERA-
MEMORY.
The aspect ratio of the picture switches
to 4:3.
(_) Press WIDE SELECT to select the
desired screen aspect ratio.
0 Notes
• Still images will be fixed to image size [0.7M]
/_0.7M) in the 16:9 (wide) mode. In the 4:3
Inode, you can selecl up to [I.(tMI ( _.0M)'
"_° Tips
• For the number of recordable pictures, see page
42.
"10
25