Sony DCR-HC48 Operating Manual page 72

TrssNsshsstiss/Ssstisssd)
Image data stored on a "Memory
Stick Duo" cannot be played back.
• hnage
data cannot bc
pla) cd
back it"you
have modified file or timer names, or have
edited the data on a computer/ln fllis cas<
the file name flashes). This is not a
m dlhnction (p. 80).
• Pictures recorded on other devices may not
be played back or may not appear in their
actual size (p. 80).
Horizontal lines appear on the
picture. The displayed pictures are
not clear or do not appear.
• Clean tile head using the cleaning cassette
(optional) (p. 84).
No sound or only a low sound is
heard.
• Turn up the vohlme (p. 26).
• Adjust ]AUDIO MIX] until the sound is
heard appropriately (p. 49).
• If you are using an S VIDEO plug, make
sure the red and white plugs of the A/V
connecting cable are also connected (p. 32).
The sound breaks off.
• Clean tile head using the cleaning cassette
(optional) lp. 841.
"---" is displayed on the screen.
• The tape you ire phL,,ing_as recorded
without setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or
noise cannot be read.
Noises appear and (_ is displayed
on the screen.
• Tbc tape was recorded in a TV color system
other than that of your camcorder INTSC).
This is not a malfunction (p. 77).
_4ch-12b is displayed on the screen.
• The tape you arc playing was rccoMed on
another device with a 4ch microphone
14CH MIC REC). Your camcorder is not
compatible x_ith 4ch microphone recording.
Date search does not work correctly.
• Be sure to rccoM more than 2 minutes after
the date changed. If one day's recoMing is
to() short, your canlcorder may
not
accurately find the point where the
recording date changes.
• There is a blank sectkm in the beginning or
between recorded sections of the tape. This
is not a m dflmction.
Pictures output from the camcorder
do not appear on the screen of the
connected device.
• When attaching the camcorder to the
Handycam Station, close the DC IN jack
cover on the camcorder, and then fully
insert the camcorder into the Handycam
Station in the correct way securely (p. 12).
Pictures from connected devices
cannot be zoomed.
• YOLI cannot zoom pictLires 11o111 connected
dex ices on yoLIrcamcoMer (p. 24).
Time code and other information
appear on the display of the
connected device.
• Set IDISP OUTPUTI to [LCD PANEL]
while connected wilh an A/V connecting
cable (p. 52).
72