Step 2: Charging The Battery - Sony DCR-HC48 Operating Manual

Step 2: Chargingthe battery pack
2
Battery pack
POWER
switch
DC IN jack
Power cord
To the wall outlet
AC Adaptor
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 80) after
attaching it to your camcorder.
O Notes
• You cannot attach any "]ntoL]TH[UM" batte W
pack othcr th;uI the H _]'ics [0 yOUr CfU/ICoI'dCI',
1
Align the terminals of the battery
pack and your camcorder (O),
then attach the battery pack and
click it into place (Q).
4
Connect the power cord to the AC
Adaptor and the wall outlet.
5 Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
Tile CH(; (charge) lamp lights up :rod
charging starts. The CHG (chzu'ge) lamp
turns off when the battery is fully
ch,_tr_ed. Reiilove yO/ll" cnn/eoder frolI/
the Handycam Station.
2
Slide the POWER switch to OFF
(CHG) (The default setting).
3
With the • mark on the DC plug
facing up, connect the AC
Adaptor to the DC IN jack on the
Handycam Station.
CHG (charge) lamp
12