Sony DCR-HC48 Operating Manual page 33

To setthe aspect ratio accordingto
theconnected T V(16:9/4:3)
Change the aspect ratio of the image
according to tile screen size of your TV.
(_) Slide the POWER switch repeatedly to turn
on the PLAY/EDIT lamp.
@ Touch [gMgff0]--+ [MENU] ---+
(STANDARD SET) ---+ [TV TYPE] ---+
[I 6:9] or [4:3] ---+ [_.
0 Notes
• When you set [TV TYPE] to [4:31, or when the
picture's aspect ratio switches between 16:9 and
4:3, the image may jilter.
• On some 4:3 TVs, tile still image recorded in 4:3
w,pecl ratio nlay not appear in full screen. This
is not a malihnction.
"O
• When you play back a picture recorded in 16:9
w,pect ralio on a 4:3 TV nol compalible wilh the
16:9 signal, set [TV TYPE] to [4:31.
• When yotl connecl your Calllcorder to a TV
compalible wilh the ID-I/ID-2 syslem, and play
back the tape, sel [TV TYPEI to [16:91. The TV
automaticully switches tile aspect ratio
according Iv}the playback
piclurc.
When yourTV is monaural(Only one
audioinputjack)
Connect the yellow plug of tile A/V
connecting cable to the video input jack and
connect tile white/left channel) or the red
/right channel) plug to tile audio input jack
of your TV or VCR.
33