Sony HANDYCAM CCD-TR100 Service Manual page 8

You can monitor the playback picture in the viewfinder. You can also monitor the picture on a TV
screen, after connecting the camcorder to a "IVor VCR (p. 15). You can use the supplied Remote
Commander to control playback.
(1) While pressing the small green button on the POWER switch, turn it to PLAYER. The tape
transport buttons light up.
(2) Insert the recorded tape with the window faring out.
(3) Press I::>-. P layback starts.
1
3 PLAY
2
I 3 STOP REW_--PLAY--_)FF PAUSE
To stop playback, press O.
To rewind the tape, press 4t.4.
To advance the tape rapidly, press I_.
Various Playback Modes
To view a still picture (Playback pause)
Press II durin 8 playback. To resume playback, press II or I::>.
To locate a scene (Picture search)
Keep pressing << or 1.4,. during playback. To resume normal playback, release the button.
To monitor the high-speed picture while advancing the tape or rewinding (Skip scan)
Keep pressing <I<I while rewinding or b._ while advancing the tape. To resume normal playback,
press I:::>.
To view the picture In • sequence of stop-motion images
Press EDITSEARCH in playback pause mode. If you keep pressing EDITSEARCH, you can view the
picture play back in the forward (+) or reverse (-) direction.
To view the picture at 1/5 speed (Slow playback) (only with the Remote Commander)
Press I1,,-on the Remote Commander during playback. To resume normal playback, press I_. If slow
playback lasts for about I minute, it shifts to normal speed automatically.
Notes on playback
• Streaks appear and the sound is muted in the various playback modes.
• When playback pause mode lasts for 5 minutes, the camcorder automatically enters stop mode.
To display the viewfinder screen indicators on the TV
Press DISPLAY on the Remote Commander. To erase the indicators, press DISPLAY again.
To select the playback sound
Change the "HiFi SND" mode setting in the menu system (p. 29).
I
R"
O
II
i
16
17