Sony HANDYCAM CCD-TR100 Service Manual page 21

[]
[]
[]
[]
[]
[]
[] Audio/Video output jacks (p. 15)
[] Jack cover
[] LANC U control jack
[]
[]
[]
[]
[]
[]
[]
[]
Cassette compartment lid release knob
(p.9)
[] Power zoom button (p. 12)
[] Eject button (under the cover) (p. 9)
[] Hooks for shoulder strap (See below.)
[] Battery mounting surface (p. 8)
[] Cassette compartment (p. 9)
[] MIC jack (PLUG IN POWER)
Connect an external microphone (not
supplied). This jack also accepts a "plug-in-
power" microphone.
[] RFU DC OUT (RFU adaptor DC output) jack
(p._5)
/_ stands for Local Application Control Bus
System. The @ control jack is used for
controlling the tape transport of video
equipment and peripherals connected to it.
This jack has the same function as the jack
indicated as CONTROL L or REMOTE.
[] Q (Headphones) jack
[] Grip strap (p, 13)
[] Lithium battery compartment (p. 31)
.... Attar.h_l_ng" _ e Sh_er_ _:__: _ _' _ ___" " _
Attach the supplied shoulder strap to the hooks for the shoulder strap (g'_).
2 _ iiii 3
f
1
!
o
47
48
.... ............. _ ........... _ _ _ _ _R*m b_te_Com_a _ _:}_ _, _ _
The buttons that have the same name on the Remote Commander as on the camcorder function
identically.
[]
[]
[]
[]
[]
[] Transmitter
Point toward the remote sensor to control the
camcorder after turning on the POWER
switch on the camcorder.
[] Tape transport buttons
[] DISPLAY button
[] Size AA (R6) battery holder
[] START/STOP button
[] Power zoom button
The zooming speed is unchangeable in the
Remote Commander.
To Prepare the Remote Commander
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA
(R6)batteries.
(1) Remove the battery cover from the Remote Commander.
(2) Insert both of the size AA (R6) batteries with correct polarity.
(3) Put the battery cover back onto theRemote Commander.
1
3
Note on battery life
The batteries for the Remote Commander last about 6 months under normal operation. When the
batteries become weak or dead, the Remote Commander does not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.