Sony HANDYCAM CCD-TR100 Service Manual page 22

To Use the Remote Commander
Make sure that the COMMANDER is set to ON in the menu system.
MENU
0
Remote Control Direction
Notes on the Remote Commander
• Keep the remcte sensor away from strong light sources such as direct sunlight or illumination.
Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor and the Remote Commander.
• This camcorder works at commander mode VTR 2. The commander modes (I, 2 and 3) are used to
distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use
another Son), VCR at commander mode VTR 2, we recommend you change the commander mode or
cover the remote sensor of the VCR with black paper.
To Watch the Demonstration
You can watch a brief demonstration of pictures with special effects.
If the demonstration appears when you turn on the camcorder for the first time, exit the Demo mode to
use your camcorder.
To enter Demo mode, (1) Eject the cassette and turn the POWER switch to OFF. (2) Turn STANDBY
up. (3) While holding down E::>-, turn the POWER switch to CAMERA. Demonstraion starts. The
demonstration stops when you insert the cassette.
Note that once you enter Demo mode, this mode is retained as long as the lithium battery is in place.
Therefore, demonstration starts automatically 10 minutes later everytime you turn the POWER switch
to CAMERA, or after you eject the cassette.
To exit Demo mode, (1) Turn the POWER switch to OFF. (2) Turn STANDBY up. (3) While holding
down r-1 turn the POWER switch to CAMERA.
O.
5"
l
¢h
O
For details on each indicator, refer to the pages indicated in the parentheses.
[] []
[]
[]
[]
[]
[]
[] WIND indicator (p. 29)
[] Manual focusing (p. 23)
[] PROGRAM AE indicator (p. 21)
[] Steady shot indicator (CCD-TR83/TR93
only)(p. 24)
[] Back Lightindicator (p. 20)
[] PICTURE EFFECT indicator (p. _._)
[] FADER indicator (p. 22)
[] Power zoom indicator (p. 12)
[] Warning indicators (p. 51)
[] Recording lamp/Battery lamp
[] Lights up when playing back a tape
recorded in LP mode•
[] Tape transport mode
[] Tape counter (P. 11)
[] Remaining tape Indicator
[] S-Second recording indicator (p. 27)
[] Remaining battery indicator (p. 34)
4i]÷ ¢'--]
[] AUTO DATE indicator (p. 10)
[] Date or time indicator (p. 20)
[] Tape counter (p. 11)
Date or time indicator (p. 20)
[] Warning indicators (p. 51)
[] Remaining battery indicator (p. 34)
_i] ÷ _i] ÷ (-_i] ÷ 4--;i ÷ 4-- 1
49 50